Screw Neck Vial|Precision Thread Vial ND18 8,0 ml 46 x 22,5 mm Amber

Screw Neck Vial|Precision Thread Vial ND18 8,0 ml 46 x 22,5 mm Amber

  • 10ml Precision Thread Headspace-Vial, 46 x 22.5mm, amber glass, 1st hydrolytic class, rounded bottom (for MAGNETIC screw caps)

  • Artikelnummer: 18091310

  • Antal/fp: 100

Lägg till i favoritlista

Jämför

Du måste godkännas som kund hos Genetec för att använda den här funktionen

Beställningsvara

10ml Precision Thread Headspace-Vial, 46 x 22.5mm, amber glass, 1st hydrolytic class, rounded bottom (for MAGNETIC screw caps)

- IMPORTANT SAFETY TIP: As Headspace vials have to withstand high internal pressure, almost all vials on the next page have a wall thickness of 1.2mm. Thus it is guaranteed that the vial will not burst. Contrary to a widely spread opinion, the seal and not the vial represents the weakest part of the whole sytem. Under pressure the septa will bulge against the Aluminum cap with such a force that the cap is torn apart. By own testing we varified that e.g. our PerkinElmer vial 20 09 0297 can easily withstand 10 bars or more while the seal is torn apart at around 10 bars when no pressure release system – like our Headspace Cap – is used.
- Rounded or flat bottom? A rounded bottom is more sturdy and thus more resistant to the high pressure within the vial during the heating process. Furthermore the vial slides more easily into the heating block when being transported by a magnet. A flat bottom might be necessary when vials have to run within the instrument on a slightly downwards tendency.
- Screw Caps are a novelty in the crimp neck dominated Headspace area. However, they represent a ready to use, convenient solution, that does not require any additional tools (crimpers, decappers). Thus samples can be taken and sealed out in the field without the necessity of sample transfer later in the lab. The magnetic Screw Seals can be used universally for Headspace as
  • TEKNISK SPECIFIKATION
  • Tillverkare
    Thermo Scientific
  • Leveranstid (arb.dgr)
    10-30
  • Lager-/beställningsvara
    Beställningsvara
  • Volym (ml)
    10 ml
  • Typ av vial
    Precision Thread Vial, Screw Neck Vial
  • Dimension (mm)
    46 x 22,5 mm
  • Neck Type
    Precision Thread ND18
  • Gänga
    No
  • Vialmaterial
    glass
  • Vialfärg
    Amber
  • Vialdesign
    rounded bottom
  • Vialdesign 2
    No
  • Skrivyta
    No
  • CleanPack
    Yes
  • Certifierad
    No
  • Usable Volume (ml)
    8,0 ml
  • Residual Vol (µl)
    <800 µl
  • Min. Working Volume (µl)
    1,5 ml
  • Total Filling Volume (ml)
    10,8 ml
  • Glasmaterial
    1. hydrol. Class
  • Insert-material
    No
  • Insert-profil
    No
  • Insert-färg
    No
  • Vial Finnish Diameter (mm)
    18 mm
  • Nominell diameter
    ND18
  • Vialkategori
    No
  • Applikationsområde
    Headspace
  • Typ av förpackning
    PP-Box
  • Typ av produkt
    Vial
  • UNSPSC-kod
    41121806
  • Tullstatnr
    70172000
Main Catalog Vials and Closures
Relaterade produkter
Screw Cap (Silver) 18 mm, Silicone/PTFE Septa
Art.nr. 18032063 Beställningsvara
Screw Cap (Silver) 18 mm, Silicone/PTFE Septa
Art.nr. 18031414 Beställningsvara
Screw Cap (Silver) 18 mm, Silicone/PTFE Septa
Art.nr. 18031309 Beställningsvara
Nya produkter
J'sphere Cartridge Column, C18, 4 µm, 125 mm x 2.1 mm
Art.nr. JL08S04-R5Q1QC Beställningsvara
LC Column Tubes 10mm ID x 1/2" OD 5cm
Art.nr. 101-08100-005 Beställningsvara
CHROMAFIX PA, SPE Cartridges 0.4 ml 170 mg, 50/ PK
Art.nr. 731849 Beställningsvara
Pressure Relief Valve Tee Assembly 1/4-28 Threads
Art.nr. P-612 Beställningsvara
Plunger Support and Reproducibility Devices|Built-In Syringe Guide Syringe Guide 2 µl Knurled Hub (KH) PST 3
Art.nr. 88407 Beställningsvara
ECOPLUS Glass Column, AB, 10 mm ID, 330-500 mm, 26-39 ml, 80 bar, 10 µm
Art.nr. TAC10/500SLPE0-AB-2 Beställningsvara
YMC-Pack Cartridge Column, C4, 5 µm, 250 mm x 4.0 mm
Art.nr. BU12S05-2504QC Beställningsvara
Hydrosphere Capillary Column, C18, 3 µm, 100 mm x 500 µm
Art.nr. HS12S03-10J0AU Beställningsvara
Kontakta mig Kontakta mig Alf Schau + 46 31 709 81 90 E-post