12 Gauge Fill Tubing (Specified Length)

12 Gauge Fill Tubing (Specified Length)

  • 12 Gauge Fill Tubing (Specified Length)

  • Artikelnummer: 1172-01

  • Antal/fp: 1

Lägg till i favoritlista

Jämför

Du måste godkännas som kund hos Genetec för att använda den här funktionen

Beställningsvara

PTFE tubing for ML500 valves with M6 threads. The Microlab 500 tubing assemblies are manufactured using thick walled FEP tubing. The thick walled tubing is desirable because it resists kinking during the rigors of the workday. The tubing comes in two different sizes 12 gauge and 18 gauge. The 12 gauge tubing has a larger inner diameter and should be used with syringe sizes larger than 2.5 mL or with viscous liquids. The dispense tubing is used to connect from the valve to the hand probe. It is tapered at one end to minimize contamination from one sample to the next. The Fill tubing is used to connect between the valve and the reagent reservoir and comes with a blunt tip. Tubes are pre-cut to 650 mm for fill tubing and 900 mm for dispense tubing. Custom length part numbers are available and can generally be shipped within 7-10 business days.
  • TEKNISK SPECIFIKATION
  • Tillverkare
    Hamilton
  • Leveranstid
    7
  • Lager-/beställningsvara
    Beställningsvara
  • Produkttyp
    Tubing
  • Used with Syringe Volumes
    Greater than 1 mL
  • Type of Tubing
    Fill
  • Tubing Point
    Non-tapered
  • Electrical Connection
    No
  • Slang material
    PTFE
  • Gauge
    12 gauge
  • Tubing Threads
    M6 or 1/4-28
  • Tubing Length
    Custom
  • Tubing Volume
    3.14 µl/mm
  • Upstream Cable Connector
    No
  • Downstream Cable Connector
    No
  • Instrument-tillverkare
    Hamilton
  • Instrument-model
    Microlab 500 A, Microlab 500 B
  • UNSPSC-kod
    No
  • Tullstatnr
    No
Microlab 600 Diluter Dispenser Catalog
Nya produkter
Disposable Syringe Disposable Syringe 10 ml PST
Art.nr. 10362405 Beställningsvara
Stainless Steel/PEEK Fitting VHP Coned - 10-32 1/16 in
Art.nr. VHP-3200 Beställningsvara
ECO Glass Column, SR, 25 mm ID, 630-750 mm, 365-390 ml, 15 bar, 10-16 µm
Art.nr. ECO25/750V0K Beställningsvara
Manual GC Injection|On-Column Injection Syringe 10 µl Cemented Needle (N) PST 3
Art.nr. 80351 Beställningsvara
Modular Systems 2.1mm ID, Parker Port 25cm, Frit 0.5µm
Art.nr. 5041IP-04021-025-05 Beställningsvara
YMC Chiral HPLC Column, Coated Amylose, 5 µm, 150 mm x 2.0 mm
Art.nr. KAN99S05-1502WT Beställningsvara
OPTI-SEAL UHMW-PE Piston Seal, Varian 10ml S/SC Heads
Art.nr. 38-36-00632 Beställningsvara
Modular Systems 4.0 mm x 5cm, Waters Port
Art.nr. 5041IW-05040-005-20 Beställningsvara
Kontakta mig Kontakta mig Alf Schau + 46 31 709 81 90 E-post