12 Gauge Dispense Tubing 900 mm

12 Gauge Dispense Tubing 900 mm

  • 12 Gauge Dispense Tubing 900 mm

  • Artikelnummer: 240360

  • Antal/fp: 1

Lägg till i favoritlista

Jämför

Du måste godkännas som kund hos Genetec för att använda den här funktionen

Beställningsvara

PTFE tubing for ML500 valves with M6 threads. The Microlab 500 tubing assemblies are manufactured using thick walled FEP tubing. The thick walled tubing is desirable because it resists kinking during the rigors of the workday. The tubing comes in two different sizes 12 gauge and 18 gauge. The 12 gauge tubing has a larger inner diameter and should be used with syringe sizes larger than 2.5 mL or with viscous liquids. The dispense tubing is used to connect from the valve to the hand probe. It is tapered at one end to minimize contamination from one sample to the next. The Fill tubing is used to connect between the valve and the reagent reservoir and comes with a blunt tip. Tubes are pre-cut to 650 mm for fill tubing and 900 mm for dispense tubing. Custom length part numbers are available and can generally be shipped within 7-10 business days.
  • TEKNISK SPECIFIKATION
  • Tillverkare
    Hamilton
  • Leveranstid
    7
  • Lager-/beställningsvara
    Beställningsvara
  • Produkttyp
    Tubing
  • Used with Syringe Volumes
    Greater than 1 mL
  • Type of Tubing
    Dispense
  • Tubing Point
    Tapered
  • Electrical Connection
    No
  • Slang material
    PTFE
  • Gauge
    12 gauge
  • Tubing Threads
    M6 or 1/4-28
  • Tubing Length
    900 mm (3 ft)
  • Tubing Volume
    2827 µl
  • Upstream Cable Connector
    No
  • Downstream Cable Connector
    No
  • Instrument-tillverkare
    Hamilton
  • Instrument-model
    Microlab 500 A, Microlab 500 B, Microlab 500 C
  • UNSPSC-kod
    No
  • Tullstatnr
    No
Microlab 600 Diluter Dispenser Catalog
Nya produkter
Screw Cap (Blue) 9 mm, PTFE virginal Septa
Art.nr. 09151828 Beställningsvara
Stainless Steel Fitting UHPLC Connection System
Art.nr. UPFS-6254070T Beställningsvara
YMC-Pack Capillary Column, C18, 3 µm, 50 mm x 300 µm
Art.nr. AA12S03-05H0AU Beställningsvara
NUCLEODUR HPLC Column, C18 Isis, 5 µm, 125 mm x 2.0 mm
Art.nr. 760412.20 Beställningsvara
YMC RP Classics HPLC Column, C4, 5 µm, 30 mm x 2.0 mm
Art.nr. BU30S05-0302WT Beställningsvara
OPTI-PAK Trap Column, SAX, x
Art.nr. 10-03317-TF Beställningsvara
Straight Ferrules For Tubing with OD 1/8''
Art.nr. 214200-46 Beställningsvara
Modular Systems 3.0mm ID, Valco Port 3cm, Frit 2µm
Art.nr. 5041IV-05030-003-20 Beställningsvara
Kontakta mig Kontakta mig Alf Schau + 46 31 709 81 90 E-post