YMC-Accura Triart Column, Diol-HILIC, 3 µm, 150 mm x 2.1 mm

YMC-Accura Triart Column, Diol-HILIC, 3 µm, 150 mm x 2.1 mm

  • YMC-Accura Triart Diol-HILIC, bioinert coated narrowbore HPLC Column (2.1 mm ID), 12 nm, S-3 µm, 150 x 2.1 mm

  • Artikelnummer: TDH12S03-15Q1PTC

  • Antal/fp: 1

Lägg till i favoritlista

Jämför

Du måste godkännas som kund hos Genetec för att använda den här funktionen

Beställningsvara

For challenging substances such as oligonucleotides, nucleotides, selected proteins/peptides and metal-coordinating small molecules e.g., organophosphates, various bioinert options are offered for YMC-Triart columns:

The new YMC-Accura Triart (U)HPLC columns are characterised by a bioinert surface coating on the column body and frit. YMC-Accura columns are ready to use without any preconditioning, unlike the analysis of sensitive substances using standard columns. The sensitivity is significantly enhanced and precious samples are recovered without any loss. The coating is less hydrophobic compared to the PEEK-lining used in the YMC-Triart metal-free (U)HPLC columns.

YMC-Triart metal-free (U)HPLC columns are fully bioinert columns due to their PEEK lined stainless steel column body and the use of PEEK frits. The stationary phase and hence the samples are only in contact with PEEK once the inside the column. Due to the use of stainless steel as outer body, the same pressure limits as for standard columns can be maintained, 100 MPa / 14,500 psi for UHPLC purposes and 45 MPa / 6,520 psi for HPLC use.

These 2 options allow for the optimum inert hardware for analyses of any sensitive compound. Both column types show excellent peak shapes for sensitive compounds, prevent carry over and ensure complete recovery. They are especially ideal for the use in highly sensitive LC/MS analyses.
  • TEKNISK SPECIFIKATION
  • Tillverkare
    YMC
  • Leveranstid (arb.dgr)
    17
  • Lager-/beställningsvara
    Beställningsvara
  • Längd
    150 mm
  • ID
    2.1 mm
  • Partikelstl.
    3 µm
  • Porstorlek
    120Å
  • Fas
    1,2-Dihydroxypropane
  • Fas 2
    No
  • Fas namn
    Diol-HILIC
  • Basmaterial
    Silica/Polymer hybrid
  • Kolonntyp
    Column
  • Partikeltyp
    Porous
  • Carbon Load
    -
  • pH Lägsta
    2
  • pH Högsta
    10
  • Endcapping
    -
  • Separation Mode
    HILIC, Normal Phase
  • Max tryck
    450 bar
  • Max temp
    No
  • Ytarea
    360 m²/g
  • USP
    L20
  • UNSPSC-kod
    41115709
  • Tullstat.nr.
    90279000
  • Brand/märke
    YMC-Accura Triart
  • Produkttyp
    HPLC Column
YMC-Triart (U)HPLC Columns
Flyer - YMC-Accura-Triart-bioinert (U)HPLC-columns
Nya produkter
CHROMABOND HR-P, SPE Column 6 ml 1000 mg, 30/ PK
Art.nr. 730118 Beställningsvara
YMC-Pack Capillary Column, Silica, 5 µm, 75 mm x 300 µm
Art.nr. SL06S05-L5H0RU Beställningsvara
YMC-Triart Capillary Column, C18 ExRS, 3 µm, 150 mm x 75 µm
Art.nr. TAR08S03-15E8AU Beställningsvara
YMC-Pack Cartridge Column, C1, 5 µm, 150 mm x 2.1 mm
Art.nr. TM12S05-15Q1QT Beställningsvara
IDEX Tygon® LMT-55 Extension Tubing
Art.nr. SC0028T Beställningsvara
PA (Polyamide / Nylon) Syringe Filters 0.22 µm 25 mm Polypropylene
Art.nr. 347-25022NM Beställningsvara
Adaptator GL45 Smart Healthy Caps, a screw GL55, in PP
Art.nr. AD-55-50PP Beställningsvara
Crimp Cap (Clear lacquered) 11 mm, Nat.Rubber/TEF Septa
Art.nr. 11030209
Redo för leverans
Kontakta mig Kontakta mig Alf Schau + 46 31 709 81 90 E-post