YMC-Accura Triart Column, C18 ExRS, 5 µm, 100 mm x 4.6 mm

YMC-Accura Triart Column, C18 ExRS, 5 µm, 100 mm x 4.6 mm

  • YMC-Accura Triart C18 ExRS, bioinert coated classical Analytical HPLC Column (4.6 mm ID), 8 nm, S-5 µm, 100 x 4.6 mm

  • Artikelnummer: TAR08S05-1046PTC

  • Antal/fp: 1

Lägg till i favoritlista

Jämför

Du måste godkännas som kund hos Genetec för att använda den här funktionen

Beställningsvara

For challenging substances such as oligonucleotides, nucleotides, selected proteins/peptides and metal-coordinating small molecules e.g., organophosphates, various bioinert options are offered for YMC-Triart columns:

The new YMC-Accura Triart (U)HPLC columns are characterised by a bioinert surface coating on the column body and frit. YMC-Accura columns are ready to use without any preconditioning, unlike the analysis of sensitive substances using standard columns. The sensitivity is significantly enhanced and precious samples are recovered without any loss. The coating is less hydrophobic compared to the PEEK-lining used in the YMC-Triart metal-free (U)HPLC columns.

YMC-Triart metal-free (U)HPLC columns are fully bioinert columns due to their PEEK lined stainless steel column body and the use of PEEK frits. The stationary phase and hence the samples are only in contact with PEEK once the inside the column. Due to the use of stainless steel as outer body, the same pressure limits as for standard columns can be maintained, 100 MPa / 14,500 psi for UHPLC purposes and 45 MPa / 6,520 psi for HPLC use.

These 2 options allow for the optimum inert hardware for analyses of any sensitive compound. Both column types show excellent peak shapes for sensitive compounds, prevent carry over and ensure complete recovery. They are especially ideal for the use in highly sensitive LC/MS analyses.
  • TEKNISK SPECIFIKATION
  • Tillverkare
    YMC
  • Leveranstid (arb.dgr)
    17
  • Lager-/beställningsvara
    Beställningsvara
  • Längd
    100 mm
  • ID
    4.6 mm
  • Partikelstl.
    5 µm
  • Porstorlek
    80Å
  • Fas
    C18
  • Fas 2
    No
  • Fas namn
    C18 ExRS
  • Basmaterial
    Silica/Polymer hybrid
  • Kolonntyp
    Column
  • Partikeltyp
    Porous
  • Carbon Load
    25%
  • pH Lägsta
    1
  • pH Högsta
    12
  • Endcapping
    Multi-stage
  • Separation Mode
    Reversed Phase
  • Max tryck
    450 bar
  • Max temp
    No
  • Ytarea
    430 m²/g
  • USP
    L1
  • UNSPSC-kod
    41115709
  • Tullstat.nr.
    90279000
  • Brand/märke
    YMC-Accura Triart
  • Produkttyp
    HPLC Column
YMC-Triart (U)HPLC Columns
Flyer - YMC-Accura-Triart-bioinert (U)HPLC-columns
Nya produkter
PEEK/Stainless Steel Ferrule Super Flangeless Flat-Bottom - 1/4-28 1/8 in Natural
Art.nr. P-350 Beställningsvara
GC Autosampler|Manual GC Injection|Standard Injection Calibrated Syringe 10 µl Removable Needle (RN) PST 2
Art.nr. CAL80330 Beställningsvara
Stainless Steel Fitting VHP Coned - M4 1/32 in
Art.nr. VHP-900 Beställningsvara
YMC-Pack Capillary Column, CN, 5 µm, 75 mm x 300 µm
Art.nr. CN12S05-L5H0RU Beställningsvara
OPTIMA Fused Silica GC Column 5 ID: 0.32 mm, 0.35 µm, 25 m
Art.nr. 726628.25 Beställningsvara
12 gauge, Metal Hub NDL, 2 in, point style 3
Art.nr. 91012 Beställningsvara
PEEK 0.062 inch OD/ 0.030 inch ID, Large Hub RN NDL, 2 in, point style 3
Art.nr. 8650-01 Beställningsvara
YMC-Pack Capillary Column, C4, 3 µm, 50 mm x 100 µm
Art.nr. BU20S03-05F0AU Beställningsvara
Kontakta mig Kontakta mig Alf Schau + 46 31 709 81 90 E-post