OPTI-PAK Trap Column, C18, x

OPTI-PAK Trap Column, C18, x

  • OPTI-PAK, 0.12µl, C18, 5/pk

  • Artikelnummer: 10-03328-TA

  • Antal/fp: 5

Lägg till i favoritlista

Jämför

Du måste godkännas som kund hos Genetec för att använda den här funktionen

Beställningsvara

The OPTI-PAK's unique hardware design integrates a PEEK holder with an auto-adjusting stem which provides a fluid interface with any 10-32 standard injector port, and guarantees a zero-dead-volume connection despite variances in tube stop depth. A proprietary method of frit placement allows the packed stem to be positioned directly into the flow path, which eliminates all excess swept volume. Less swept volume translates to absolute minimum sample dilution and dispersion. The elegant, flexible design of OPTI-PAK® makes it amenable to virtually any trapping application. Installing an OPTI-PAK® into the outlet of a switching valve will facilitate the trapping, desalting, and pre-concentration of an analyte mixture. With Opti-Paks versatility, a second trap can be added downstream in the loop of an injection valve and effectively perform a 2D separation.

Key Features

- Includes 5 disposable 10-32 hand-tight holders and custom packed cartridges
- Specially designed for use in todays low volume trapping applications
- Packed stem is positioned directly in flow path
- Absolute minimum sample dilution and dispersion
- Auto adjusting ZDV connection
- Amenable to any trapping technique
- Can be installed side-by-side in same valve stator without interference
  • TEKNISK SPECIFIKATION
  • Tillverkare
    Optimize Technologies
  • Leveranstid (arb.dgr)
    10
  • Lager-/beställningsvara
    Beställningsvara
  • Längd
    No
  • ID
    No
  • Partikelstl.
    No
  • Porstorlek
    No
  • Fas
    C18
  • Fas 2
    No
  • Fas namn
    C18
  • Basmaterial
    No
  • Kolonntyp
    Trap Column
  • Partikeltyp
    No
  • Carbon Load
    No
  • pH Lägsta
    No
  • pH Högsta
    No
  • Endcapping
    No
  • Separation Mode
    No
  • Max tryck
    No
  • Max temp
    N/A
  • Ytarea
    No
  • USP
    No
  • UNSPSC-kod
    No
  • Tullstat.nr.
    90279000
  • Brand/märke
    OPTI-PAK
  • Produkttyp
    HPLC Column
Optimize - HPLC, UHPLC & LC/MS products
Nya produkter
YMC-Triart HPLC Column, C18, 3 µm, 50 mm x 4.6 mm
Art.nr. TA12S03-0546PTH Beställningsvara
J'sphere Guard Cartridge Capillary, C18, 4 µm, 5 mm x 500 µm
Art.nr. JH08S04-E5J0AU Beställningsvara
CHROMABOND HLB, SPE 96 Plates 10 mg, 1/ PK
Art.nr. 738921.010M Beställningsvara
NUCLEODUR Guard Cartridge, HILIC, 1.8 µm, 4 mm x 3.0 mm
Art.nr. 761960.30 Beställningsvara
Connector - Small-Bore, Primary - 18/8 Stainless Steel,
Art.nr. ISM584 Beställningsvara
Filter End Fitting 0.5µm PEEK for MicroTight Tubing Sleeve 10 Pack
Art.nr. M-120X Beställningsvara
NUCLEODUR HPLC Column, C18 Gravity, 1.8 µm, 100 mm x 3.0 mm
Art.nr. 760076.30 Beställningsvara
EXP Guard Cartridge, C4, 1.8 µm, 5 mm x 4.6 mm
Art.nr. 15-04108-HC Beställningsvara
Kontakta mig Kontakta mig Alf Schau + 46 31 709 81 90 E-post