Holder - Guard Cartridge, 20 x 1, 3, 4 mm

Holder - Guard Cartridge, 20 x 1, 3, 4 mm

  • External Guard Cartridge Holder to screw on Head for 20 x 1-4.6 mm Guard Cartridges

  • Artikelnummer: XPGCH-Q2

  • Antal/fp: 1

Lägg till i favoritlista

Jämför

Du måste godkännas som kund hos Genetec för att använda den här funktionen

Beställningsvara

YMC offers two different analytical guard cartridge holder concepts. The universal finger tight system is for all column internal diameters from 1.0 to 4.6 mm id (XPGCH-Q1 for 10 mm cartridges and XPGCH-Q2 for 20 mm cartridges).

This system guarantees a low dead volume connection between the guard cartridge and the main column irrespective of the type of column fitting used. The guard cartridge holder gives leak-proof connection to the analytical column up to 8,000 psi (550 bar).

In addition YMC offers a specific integral guard cartridge holder (XPGCS-Q1 for 10 mm and XPGCS-Q2 for 20 mm length cartridges with 1.0; 2.1; 3.0 or 4.0 mm inner diameters).

This holder is screwed directly on the YMC cartridge column system in place of the removable end fitting (part numbers ending in QT). The guard cartridges are inserted in the holder cavity without the need to use any tools. These integral guard cartridge holders will not attach to columns with part numbers ending in WT or PT.
  • TEKNISK SPECIFIKATION
  • Tillverkare
    YMC
  • Leveranstid (arb.dgr)
    7-21
  • Lager-/beställningsvara
    Beställningsvara
  • Längd
    20
  • ID
    1, 3, 4 mm
  • Partikelstl.
    No
  • Porstorlek
    Proprietary
  • Fas
    No
  • Fas 2
    No
  • Fas namn
    No
  • Basmaterial
    No
  • Kolonntyp
    Holder - Guard Cartridge
  • Partikeltyp
    No
  • Carbon Load
    No
  • pH Lägsta
    No
  • pH Högsta
    No
  • Endcapping
    No
  • Separation Mode
    No
  • Max tryck
    550 bar
  • Max temp
    No
  • Ytarea
    No
  • USP
    No
  • UNSPSC-kod
    41115709
  • Tullstat.nr.
    90279000
  • Brand/märke
    No
  • Produkttyp
    HPLC Column
YMC (U)HPLC Troubleshooting Guide
Nya produkter
Macherey-Nagel Fused Silica GC Column BETA-6TBDM ID: 0.25 mm, 25 m
Art.nr. 723381.25 Beställningsvara
YMC-Pack Cartridge Column, C18, 3 µm, 50 mm x 3.0 mm
Art.nr. AQ12S03-0503QC Beställningsvara
OPTIMA Fused Silica GC Column 17 ID: 0.25 mm, 0.25 µm, 25 m
Art.nr. 726022.25 Beställningsvara
Analytical Guard Cartridge, Quick-Seal™, 1.0 mm ID x 1.0cm, Frit 0.5 µm
Art.nr. 9105-05QSA Beställningsvara
Stainless Steel Ferrule Coned - 10-32 1/16 in
Art.nr. 6000-117 Beställningsvara
YMC-Pack Capillary Column, NH2, 3 µm, 50 mm x 100 µm
Art.nr. NH12S03-05F0RU Beställningsvara
YMC-Pack Guard Cartridge Capillary, C1, 3 µm, 5 mm x 300 µm
Art.nr. TM12S03-E5H0AU Beställningsvara
Hydrosphere Cartridge Column, C18, 5 µm, 125 mm x 4.0 mm
Art.nr. HS12S05-R504QC Beställningsvara
Kontakta mig Kontakta mig Alf Schau + 46 31 709 81 90 E-post