EXP Trap Column Replacement Stems, Phenyl, x

EXP Trap Column Replacement Stems, Phenyl, x

  • EXP Replacement Stems, 0.68µl, HALO Phenyl-Hexyl, 3/pk

  • Artikelnummer: 15-04008-HF

  • Antal/fp: 3

Lägg till i favoritlista

Jämför

Du måste godkännas som kund hos Genetec för att använda den här funktionen

Beställningsvara

The entire EXP® Stem Trap and reusable holder are only slightly larger than a standard HPLC fitting. Its slim architecture allows it to easily fit into crowded instrument compartments or to connect directly to tightly-spaced injection ports. When tightened by hand, the EXP® Stem Trap seals to 8,700+ psi. All configurations incorporate wrench-flats to enable flawless sealing to 20,000+ psi (1,400+ bar). The unique packed floating stem installs directly into any 10-32 port and automatically adjusts to provide a perfect ZDV connection. The EXP® System enables chemists to quickly remove detergents or salts which can affect the ionization process in MS work. This trapping technique can concentrate the sample directly on-line, allowing for increased recovery of precious sample material compared to off-line techniques. On-line trapping readily lends itself to automation for high-throughput analysis in UHPLC/MS applications.

Key Features

- Kit includes EXP® Stem Holder with fittings and 3 EXP® Stem Traps
- Rated to 20,000+ psi (1,400+ bar)
- Hand-tight and wrench-tight configuration
- Intended for many repeat uses
- Auto-adjusting ZDV connection
- Bed volumes from 0.17 µL to 2.6 µL
- Low-volume/low-dispersion cartridges
- Custom packing available
  • TEKNISK SPECIFIKATION
  • Tillverkare
    Optimize Technologies
  • Leveranstid (arb.dgr)
    10
  • Lager-/beställningsvara
    Beställningsvara
  • Längd
    No
  • ID
    No
  • Partikelstl.
    No
  • Porstorlek
    No
  • Fas
    Phenyl
  • Fas 2
    No
  • Fas namn
    Phenyl
  • Basmaterial
    No
  • Kolonntyp
    Trap Column Replacement Stems
  • Partikeltyp
    No
  • Carbon Load
    No
  • pH Lägsta
    No
  • pH Högsta
    No
  • Endcapping
    No
  • Separation Mode
    No
  • Max tryck
    1400 bar (20 000 psi)
  • Max temp
    N/A
  • Ytarea
    No
  • USP
    No
  • UNSPSC-kod
    No
  • Tullstat.nr.
    90279000
  • Brand/märke
    EXP
  • Produkttyp
    HPLC Column
Optimize - EXP Product Family
Optimize - HPLC, UHPLC & LC/MS products
Nya produkter
YMC-Pack HPLC Column, Diol, 3 µm, 250 mm x 4.6 mm
Art.nr. DL12S03-2546WT Beställningsvara
Screw Cap (Red) 9 mm, Nat.Rubber/TEF Septa
Art.nr. 525-09151669 Beställningsvara
ECO Glass Column, AB, 15 mm ID, 10-120 mm, 2-19 ml, 25 bar, 16-40 µm
Art.nr. ECO15/120M3V-K Beställningsvara
Back-Up Seal, Dionex Dionex Analytical Pumps, 10/pk
Art.nr. 25-36-00602 Beställningsvara
CHROMABOND HR-P, SPE 96 Plates 100 mg, 1/ PK
Art.nr. 738111.100M Beställningsvara
ITB PTFE Plunger Seal, Waters 225 µl Head (#3)
Art.nr. 39-36-01215 Beställningsvara
NUCLEODUR HPLC Column, C18 HTec, 5 µm, 150 mm x 2.0 mm
Art.nr. 760315.20 Beställningsvara
Plunger Assembly TLL-SAL 1710
Art.nr. 205619 Beställningsvara
Kontakta mig Kontakta mig Alf Schau + 46 31 709 81 90 E-post