EXP Stem Trap Kit, Phenyl-Hexyl, x

EXP Stem Trap Kit, Phenyl-Hexyl, x

  • EXP Stem Trap Kit, 2.6µL, 5.0 HALO, Phenyl-Hexyl

  • Artikelnummer: 15-04021-HS

  • Antal/fp: 1

Lägg till i favoritlista

Jämför

Du måste godkännas som kund hos Genetec för att använda den här funktionen

Beställningsvara

The entire EXP®2 Stem Trap and reusable holder are only slightly larger than a standard HPLC fitting. Its slim architecture allows it to easily fit into crowded instrument compartments or to connect directly to tightly-spaced injection ports. When tightened by hand, the EXP2 Stem Trap seals to 8,700+ psi. All configurations incorporate wrench-flats to enable flawless sealing to 20,000+ psi (1,400+ bar). The unique packed floating stem installs directly into any 10-32 port and automatically adjusts to provide a perfect ZDV connection. The EXP System enables chemists to quickly remove detergents or salts which can affect the ionization process in MS work. This trapping technique can concentrate the sample directly on-line, allowing for increased recovery of precious sample material compared to off-line techniques. On-line trapping readily lends itself to automation for high-throughput analysis in UHPLC/MS applications. Specialized features, patented technology, precision engineering and state-of-the-art manufacturing make the new EXP2 Stem Trap an unbeatable choice for ultra high-pressure trapping applications.

The new EXP2 design incorporates integral ferrule into the front-end of the holder. No separate ferrule to lose.

KEY FEATURES
- Kit includes EXP®2 Stem Holder with fittings and 3 EXP® Stem Traps
- Rated to 6,000+ psi (410+ bar)
- Hand-tight and wrench-tight configuration
- Intended for many repeat uses
- Auto-adjusting ZDV connection
- Bed volumes from 0.17 µL to 2.6 µL
- Low-volume/low-dispersion cartridges
- Custom packing available
- For nano flow applications
- New EXP2 design incorporates integral ferrule into the front-end of the holder. No separate ferrule to lose.

COMPATIBLE HOLDER & INSERTS
EXP®2 Stem Holder
EXP®2 Stem Filters
  • TEKNISK SPECIFIKATION
  • Tillverkare
    Optimize Technologies
  • Leveranstid (arb.dgr)
    10
  • Lager-/beställningsvara
    Beställningsvara
  • Längd
    No
  • ID
    No
  • Partikelstl.
    No
  • Porstorlek
    No
  • Fas
    Phenyl-Hexyl
  • Fas 2
    No
  • Fas namn
    Phenyl-Hexyl
  • Basmaterial
    No
  • Kolonntyp
    Stem Trap Kit
  • Partikeltyp
    No
  • Carbon Load
    No
  • pH Lägsta
    No
  • pH Högsta
    No
  • Endcapping
    No
  • Separation Mode
    No
  • Max tryck
    1400 bar (20 000 psi)
  • Max temp
    No
  • Ytarea
    No
  • USP
    No
  • UNSPSC-kod
    No
  • Tullstat.nr.
    90279000
  • Brand/märke
    EXP
  • Produkttyp
    HPLC Column
Optimize - EXP Product Family
Application Note 101 - Trapping -a general guide
Optimize - HPLC, UHPLC & LC/MS products
Optimize - LC Trapping Guide & Products
Nya produkter
20 mm Crimper for Flip Top/Flip Off Seals
Art.nr. 20060043 Beställningsvara
OPTI-MAX Inlet Cartridge Check Valve, 1/16'' Shimadzu
Art.nr. 34-47-02644 Beställningsvara
YMC-Pack Cartridge Column, NH2, 3 µm, 100 mm x 3.0 mm
Art.nr. NH12S03-1003QC Beställningsvara
YMCbasic Semi-preparative Column, C8, 10 µm, 150 mm x 30.0 mm
Art.nr. BA99S11-1530WT Beställningsvara
Delrin/Tefzel Fitting Flangeless Flat-Bottom - 1/4-28 1/16 in Black/Blue
Art.nr. XP-208 Beställningsvara
NUCLEOSIL HPLC Column, C18, 5 µm, 250 mm x 2.0 mm
Art.nr. 720014.20 Beställningsvara
NUCLEODUR HPLC Column, HILIC, 3 µm, 125 mm x 3.0 mm
Art.nr. 760531.30 Beställningsvara
EXP Trap Cartridge, C18, 2.7 µm, 5 mm x 1.0 mm
Art.nr. 15-03964-HA Beställningsvara
Kontakta mig Kontakta mig Alf Schau + 46 31 709 81 90 E-post