EXP Stem Trap Kit, Peptide, x

EXP Stem Trap Kit, Peptide, x

  • EXP2 Stem Trap Kit, 0.68µL, 10μm, Peptide (Pressure Limit : 6000psi)

  • Artikelnummer: 15-04009-TN

  • Antal/fp: 1

Lägg till i favoritlista

Jämför

Du måste godkännas som kund hos Genetec för att använda den här funktionen

Beställningsvara

The entire EXP®2 Stem Trap and reusable holder are only slightly larger than a standard HPLC fitting. Its slim architecture allows it to easily fit into crowded instrument compartments or to connect directly to tightly-spaced injection ports. When tightened by hand, the EXP2 Stem Trap seals to 8,700+ psi. All configurations incorporate wrench-flats to enable flawless sealing to 20,000+ psi (1,400+ bar). The unique packed floating stem installs directly into any 10-32 port and automatically adjusts to provide a perfect ZDV connection. The EXP System enables chemists to quickly remove detergents or salts which can affect the ionization process in MS work. This trapping technique can concentrate the sample directly on-line, allowing for increased recovery of precious sample material compared to off-line techniques. On-line trapping readily lends itself to automation for high-throughput analysis in UHPLC/MS applications. Specialized features, patented technology, precision engineering and state-of-the-art manufacturing make the new EXP2 Stem Trap an unbeatable choice for ultra high-pressure trapping applications.

The new EXP2 design incorporates integral ferrule into the front-end of the holder. No separate ferrule to lose.

KEY FEATURES
- Kit includes EXP®2 Stem Holder with fittings and 3 EXP® Stem Traps
- Rated to 6,000+ psi (410+ bar)
- Hand-tight and wrench-tight configuration
- Intended for many repeat uses
- Auto-adjusting ZDV connection
- Bed volumes from 0.17 µL to 2.6 µL
- Low-volume/low-dispersion cartridges
- Custom packing available
- For nano flow applications
- New EXP2 design incorporates integral ferrule into the front-end of the holder. No separate ferrule to lose.

COMPATIBLE HOLDER & INSERTS
EXP®2 Stem Holder
EXP®2 Stem Filters
  • TEKNISK SPECIFIKATION
  • Tillverkare
    Optimize Technologies
  • Leveranstid (arb.dgr)
    No
  • Lager-/beställningsvara
    Beställningsvara
  • Längd
    No
  • ID
    No
  • Partikelstl.
    No
  • Porstorlek
    No
  • Fas
    Peptide
  • Fas 2
    No
  • Fas namn
    Peptide
  • Basmaterial
    No
  • Kolonntyp
    Stem Trap Kit
  • Partikeltyp
    No
  • Carbon Load
    No
  • pH Lägsta
    No
  • pH Högsta
    No
  • Endcapping
    No
  • Separation Mode
    No
  • Max tryck
    410 bar (6 000 psi)
  • Max temp
    No
  • Ytarea
    No
  • USP
    No
  • UNSPSC-kod
    No
  • Tullstat.nr.
    90279000
  • Brand/märke
    EXP
  • Produkttyp
    HPLC Column
Optimize - EXP Product Family
Optimize EXP2 Stem Filter
Optimize - HPLC, UHPLC & LC/MS products
Optimize - LC Trapping Guide & Products
Application Note 101 - Trapping -a general guide
Nya produkter
ECO Glass Column, AB, 15 mm ID, 885-1000 mm, 170-163 ml, 25 bar, 40-100 µm
Art.nr. ECO15/999M4V-K Beställningsvara
Crimp Cap (Red lacquered) 20 mm, Bromo-Butyl/PTFE Septa
Art.nr. 20031623 Beställningsvara
CHROMABOND C18, SPE Column 3 ml 200 mg, 50/ PK
Art.nr. 730002 Beställningsvara
Stainless Steel Fitting UHPLC Connection System
Art.nr. UPFS-6125350 Beställningsvara
RheBuild® Kit - pH Upgrade for RV700-105/RV750-105
Art.nr. 7010-998 Beställningsvara
EXP Stem Trap Kit, ES-CN, x
Art.nr. 15-03997-HU Beställningsvara
Polyimide Rotor Seal, 3 Grooves, Agilent/HP 1090
Art.nr. 27-31-03649 Beställningsvara
YMC-Pack Capillary Column, Silica, 3 µm, 50 mm x 100 µm
Art.nr. SL06S03-05F0AU Beställningsvara
Kontakta mig Kontakta mig Alf Schau + 46 31 709 81 90 E-post