EXP Stem Trap Kit, C8, x

EXP Stem Trap Kit, C8, x

  • EXP Stem Trap Kit, 1.5µl, HALO C8

  • Artikelnummer: 15-04015-HB

  • Antal/fp: 1

Lägg till i favoritlista

Jämför

Du måste godkännas som kund hos Genetec för att använda den här funktionen

Beställningsvara

The entire EXP® Stem Trap and reusable holder are only slightly larger than a standard HPLC fitting. Its slim architecture allows it to easily fit into crowded instrument compartments or to connect directly to tightly-spaced injection ports. When tightened by hand, the EXP® Stem Trap seals to 8,700+ psi. All configurations incorporate wrench-flats to enable flawless sealing to 20,000+ psi (1,400+ bar). The unique packed floating stem installs directly into any 10-32 port and automatically adjusts to provide a perfect ZDV connection. The EXP® System enables chemists to quickly remove detergents or salts which can affect the ionization process in MS work. This trapping technique can concentrate the sample directly on-line, allowing for increased recovery of precious sample material compared to off-line techniques. On-line trapping readily lends itself to automation for high-throughput analysis in UHPLC/MS applications.

Key Features

- Kit includes EXP® Stem Holder with fittings and 3 EXP® Stem Traps
- Rated to 20,000+ psi (1,400+ bar)
- Hand-tight and wrench-tight configuration
- Intended for many repeat uses
- Auto-adjusting ZDV connection
- Bed volumes from 0.17 µL to 2.6 µL
- Low-volume/low-dispersion cartridges
- Custom packing available
  • TEKNISK SPECIFIKATION
  • Tillverkare
    Optimize Technologies
  • Leveranstid (arb.dgr)
    10
  • Lager-/beställningsvara
    Beställningsvara
  • Längd
    No
  • ID
    No
  • Partikelstl.
    No
  • Porstorlek
    No
  • Fas
    C8
  • Fas 2
    No
  • Fas namn
    C8
  • Basmaterial
    No
  • Kolonntyp
    Stem Trap Kit
  • Partikeltyp
    No
  • Carbon Load
    No
  • pH Lägsta
    No
  • pH Högsta
    No
  • Endcapping
    No
  • Separation Mode
    No
  • Max tryck
    1400 bar (20 000 psi)
  • Max temp
    N/A
  • Ytarea
    No
  • USP
    No
  • UNSPSC-kod
    No
  • Tullstat.nr.
    90279000
  • Brand/märke
    EXP
  • Produkttyp
    HPLC Column
Optimize - EXP Product Family
Application Note 101 - Trapping -a general guide
Optimize - HPLC, UHPLC & LC/MS products
Optimize - LC Trapping Guide & Products
Nya produkter
18 Gauge Dispense Tubing (Specified Length)
Art.nr. 1173-02 Beställningsvara
YMC-PAH Capillary Column, PAH, 3 µm, 150 mm x 500 µm
Art.nr. YP99S03-15J0AU Beställningsvara
PERMABOND Fused Silica GC Column Silane ID: 0.32 mm, 50 m
Art.nr. 723409.50 Beställningsvara
Slurry Packing Adapter & Seal
Art.nr. C-130-40 Beställningsvara
Check Valve Inlet 1/4-28 Male x 1/4-28 Female
Art.nr. CV-3301 Beställningsvara
Analytical Guard Cartridge 4.6 mm ID x 1.0 cm, Frit 0.5 µm
Art.nr. 9110-05 Beställningsvara
Stainless Steel Frit 10µm 0.094'' x 0.065'' x 0.250''
Art.nr. A-106 Beställningsvara
YMC-Triart HPLC Column Metal Free, C8, 5 µm, 50 mm x 2.1 mm
Art.nr. TO12S05-05Q1PTP Beställningsvara
Kontakta mig Kontakta mig Alf Schau + 46 31 709 81 90 E-post