EXP Stem Trap Kit, C4, x

EXP Stem Trap Kit, C4, x

  • EXP Stem Trap Kit, 0.17µl, C4

  • Artikelnummer: 15-03997-HI

  • Antal/fp: 1

Lägg till i favoritlista

Jämför

Du måste godkännas som kund hos Genetec för att använda den här funktionen

Beställningsvara

The entire EXP® Stem Trap and reusable holder are only slightly larger than a standard HPLC fitting. Its slim architecture allows it to easily fit into crowded instrument compartments or to connect directly to tightly-spaced injection ports. When tightened by hand, the EXP® Stem Trap seals to 8,700+ psi. All configurations incorporate wrench-flats to enable flawless sealing to 20,000+ psi (1,400+ bar). The unique packed floating stem installs directly into any 10-32 port and automatically adjusts to provide a perfect ZDV connection. The EXP® System enables chemists to quickly remove detergents or salts which can affect the ionization process in MS work. This trapping technique can concentrate the sample directly on-line, allowing for increased recovery of precious sample material compared to off-line techniques. On-line trapping readily lends itself to automation for high-throughput analysis in UHPLC/MS applications.

Key Features

- Kit includes EXP® Stem Holder with fittings and 3 EXP® Stem Traps
- Rated to 20,000+ psi (1,400+ bar)
- Hand-tight and wrench-tight configuration
- Intended for many repeat uses
- Auto-adjusting ZDV connection
- Bed volumes from 0.17 µL to 2.6 µL
- Low-volume/low-dispersion cartridges
- Custom packing available
  • TEKNISK SPECIFIKATION
  • Tillverkare
    Optimize Technologies
  • Leveranstid (arb.dgr)
    10
  • Lager-/beställningsvara
    Beställningsvara
  • Längd
    No
  • ID
    No
  • Partikelstl.
    No
  • Porstorlek
    No
  • Fas
    C4
  • Fas 2
    No
  • Fas namn
    C4
  • Basmaterial
    No
  • Kolonntyp
    Stem Trap Kit
  • Partikeltyp
    No
  • Carbon Load
    No
  • pH Lägsta
    No
  • pH Högsta
    No
  • Endcapping
    No
  • Separation Mode
    No
  • Max tryck
    1400 bar (20 000 psi)
  • Max temp
    N/A
  • Ytarea
    No
  • USP
    No
  • UNSPSC-kod
    No
  • Tullstat.nr.
    90279000
  • Brand/märke
    EXP
  • Produkttyp
    HPLC Column
Optimize - EXP Product Family
Application Note 101 - Trapping -a general guide
Optimize - HPLC, UHPLC & LC/MS products
Optimize - LC Trapping Guide & Products
Nya produkter
Snap Ring Cap (Yellow) 11 mm, Nat.Rubber/TEF Septa
Art.nr. 11151556 Beställningsvara
YMC-Pack Capillary Column, C18, 3 µm, 100 mm x 500 µm
Art.nr. AA12S03-10J0RU Beställningsvara
YMC-Pack Guard Cartridge, Silica, 3 µm, 10 mm x 4.0 mm
Art.nr. SL06S03-0104GC Beställningsvara
NUCLEOSIL HPLC Column, C8, 5 µm, 150 mm x 4.6 mm
Art.nr. 720735.46 Beställningsvara
OPTI-MAX Cartridge Check Valve Conversion Kit, Waters
Art.nr. 39-46-02168 Beställningsvara
YMC-Pack Cartridge Column, Silica, 5 µm, 250 mm x 2.1 mm
Art.nr. SL06S05-25Q1QT Beställningsvara
IDEX Fluran® F-5500-A 3-Stop Tubing
Art.nr. SC0257 Beställningsvara
Delrin/Tefzel Fitting Flangeless Flat-Bottom - 1/4-28 1/16 in Blue/Blue
Art.nr. XP-206 Beställningsvara
Kontakta mig Kontakta mig Alf Schau + 46 31 709 81 90 E-post