YMC-Accura Triart UHPLC column, Diol-HILIC, 1.9 µm, 150 mm x 2.1 mm

YMC-Accura Triart UHPLC column, Diol-HILIC, 1.9 µm, 150 mm x 2.1 mm

  • YMC-Accura Triart Diol-HILIC, bioinert coated UHPLC column (2.1 mm ID), 12 nm, S-1.9 µm, 150 x 2.1 mm

  • PartNo: TDH12SP9-15Q1PTC

  • Qty/pkg: 1

Add to Wishlist

Add to Compare

You must be approved by Genetec to use this function.

Order Item

For challenging substances such as oligonucleotides, nucleotides, selected proteins/peptides and metal-coordinating small molecules e.g., organophosphates, various bioinert options are offered for YMC-Triart columns:

The new YMC-Accura Triart (U)HPLC columns are characterised by a bioinert surface coating on the column body and frit. YMC-Accura columns are ready to use without any preconditioning, unlike the analysis of sensitive substances using standard columns. The sensitivity is significantly enhanced and precious samples are recovered without any loss. The coating is less hydrophobic compared to the PEEK-lining used in the YMC-Triart metal-free (U)HPLC columns.

YMC-Triart metal-free (U)HPLC columns are fully bioinert columns due to their PEEK lined stainless steel column body and the use of PEEK frits. The stationary phase and hence the samples are only in contact with PEEK once the inside the column. Due to the use of stainless steel as outer body, the same pressure limits as for standard columns can be maintained, 100 MPa / 14,500 psi for UHPLC purposes and 45 MPa / 6,520 psi for HPLC use.

These 2 options allow for the optimum inert hardware for analyses of any sensitive compound. Both column types show excellent peak shapes for sensitive compounds, prevent carry over and ensure complete recovery. They are especially ideal for the use in highly sensitive LC/MS analyses.
  • SPECIFICATION
  • Manufacturer
    YMC
  • Delivery Time
    17
  • Stock Type
    Beställningsvara
  • Length
    150 mm
  • ID
    2.1 mm
  • Particle Size
    1.9 µm
  • Pore Size
    120Å
  • Phase
    1,2-Dihydroxypropane
  • Phase 2
    No
  • Phase Name
    Diol-HILIC
  • Base Material
    Silica/Polymer hybrid
  • Column Type
    UHPLC Column
  • Particle Type
    Porous
  • Carbon Load
    -
  • pH-Range Low
    2
  • pH-Range High
    10
  • Endcapping
    -
  • Separation Mode
    HILIC, Normal Phase
  • Max. Pressure
    1000 bar
  • Max. Temp
    No
  • Surface Area
    360 m²/g
  • USP
    L20
  • UNSPSC Code
    41115709
  • Tariff Code
    90279000
  • Brand
    YMC-Accura Triart
  • Product Type
    HPLC Column
YMC-Triart (U)HPLC Columns
Flyer - YMC-Accura-Triart-bioinert (U)HPLC-columns
New Products
YMC-Pack HPLC Column, Diol, 5 µm, 30 mm x 4.6 mm
PartNo DN12S05-0346WT Order Item
YMC-Pack Pro HPLC Column, C18, 3 µm, 100 mm x 6.0 mm
PartNo AS12S03-1006WT Order Item
YMC-Pack Capillary Column, C4, 5 µm, 75 mm x 75 µm
PartNo BU20S05-L5E8RU Order Item
OPTIMA Fused Silica GC Column DELTA-6 ID: 0.32 mm, 1.0 µm, 30 m
PartNo 726482.30 Order Item
Methyl tert Butyl Ether, 2,5 liter
PartNo RH1008/2.5 Order Item
CHROMAFIX PA, SPE Cartridges 0.4 ml 170 mg, 50/ PK
PartNo 731849 Order Item
YMC-Triart HPLC Column, C8, 3 µm, 50 mm x 3.0 mm
PartNo TO12S03-0503PTH Order Item
HPLC Autosampler Syringe 10 µl Cemented Needle (N) PST 3
PartNo 203073 Order Item
Contact me Contact me Alf Schau + 46 31 709 81 90 E-mail