Holder - Guard Cartridge, 10 x 1, 3, 4 mm

Holder - Guard Cartridge, 10 x 1, 3, 4 mm

  • Direct Connect Guard Cartridge Holder for 10 mm Guard Cartridges

  • PartNo: XPGCS-Q1

  • Qty/pkg: 1

Add to Wishlist

Add to Compare

You must be approved by Genetec to use this function.

Order Item

YMC offers two different analytical guard cartridge holder concepts. The universal finger tight system is for all column internal diameters from 1.0 to 4.6 mm id (XPGCH-Q1 for 10 mm cartridges and XPGCH-Q2 for 20 mm cartridges).

This system guarantees a low dead volume connection between the guard cartridge and the main column irrespective of the type of column fitting used. The guard cartridge holder gives leak-proof connection to the analytical column up to 8,000 psi (550 bar).

In addition YMC offers a specific integral guard cartridge holder (XPGCS-Q1 for 10 mm and XPGCS-Q2 for 20 mm length cartridges with 1.0; 2.1; 3.0 or 4.0 mm inner diameters).

This holder is screwed directly on the YMC cartridge column system in place of the removable end fitting (part numbers ending in QT). The guard cartridges are inserted in the holder cavity without the need to use any tools. These integral guard cartridge holders will not attach to columns with part numbers ending in WT or PT.
  • SPECIFICATION
  • Manufacturer
    YMC
  • Delivery Time
    7-21
  • Stock Type
    Beställningsvara
  • Length
    10
  • ID
    1, 3, 4 mm
  • Particle Size
    No
  • Pore Size
    Proprietary
  • Phase
    No
  • Phase 2
    No
  • Phase Name
    No
  • Base Material
    No
  • Column Type
    Holder - Guard Cartridge
  • Particle Type
    No
  • Carbon Load
    No
  • pH-Range Low
    No
  • pH-Range High
    No
  • Endcapping
    No
  • Separation Mode
    No
  • Max. Pressure
    550 bar
  • Max. Temp
    No
  • Surface Area
    No
  • USP
    No
  • UNSPSC Code
    41115709
  • Tariff Code
    90279000
  • Brand
    No
  • Product Type
    HPLC Column
YMC (U)HPLC Troubleshooting Guide
New Products
HPLC Autosampler Syringe 25 µl Cemented Needle (N) PST 3
PartNo 203274 Order Item
YMC-Triart Capillary Column, C8, 5 µm, 50 mm x 75 µm
PartNo TO12S05-05E8RU Order Item
LC Column Tubes 3.2mm ID x 1/4" OD 15cm
PartNo 101-04032-015EP Order Item
EXP Trap Cartridge, C8, 2.7 µm, 5 mm x 4.6 mm
PartNo 15-03983-HB Order Item
YMC-Triart HPLC Column, C18 ExRS, 3 µm, 33 mm x 4.6 mm
PartNo TAR08S03-H346PTH Order Item
NUCLEODUR HPLC Column, C18 SPHINX RP, 5 µm, 150 mm x 4.0 mm
PartNo 760802.40 Order Item
22s gauge, Small Hub RN NDL, custom length (0.375 to 12 in), point style 5 or AS
PartNo 7731-04 Order Item
PCTFE Ferrule Coned - 10-32 360 µm
PartNo F-151 Order Item
Contact me Contact me Alf Schau + 46 31 709 81 90 E-mail